LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Programming And Setup - All Systems) >> Repair Instructions >> Electronic Brake Control Module Programming and Setup >> Electronic Brake Control Module Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronic Brake Control Module Reprogramming

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

If the EBCM needs to be reprogrammed, the following procedures must be performed:

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) 
  2. Perform the SPS function Electronic Brake Control Module - Programming and follow the on-screen instructions.
  3. 3. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals