LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 401 (Cellular System, Entertainment System, And Navigation System) >> Diagnostic Information and Procedures >> DTC B124F: Universal Serial Bus (USB) Programming >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON/vehicle in Service Mode.
  2. Verify DTC B124F is not set.
    • If DTC B124F is set 
    1. Program the device that set the DTC.
    2. Verify the DTC does not set.
      • If DTC is set, replace the device that set the DTC.
      • If the DTC is not set
    3. All OK.
    • If DTC B124F is not set 
  3. All OK