ECM Replacement
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
If the engine control module (ECM) is replaced, the following procedures must be performed:
- ECM Reprogramming - Refer to Service Programming System (SPS) .
- Theft Deterrent - Refer to Immobilizer System Component Programming .
- The CKP System Variation Learn - Refer to Crankshaft Position System Variation Learn (LF1) .
- The Throttle/Idle Learn procedure - Refer to Throttle/Idle Learn (LF1, LFW)
- Engine Oil Life Remaining - When available, use a scan tool to reset the Engine Oil Life Remaining back to the original percentage recorded before the module was replaced.
- Transmission Fluid Life Remaining - When available, use the scan tool to reset the Transmission Fluid Life Remaining back to the original percentage recorded before the module was replaced.