Liftgate Control Module Programming and Setup: Notes
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To ensure proper programming of the liftgate, the liftgate assembly must be at room temperature during calibration.
NOTE:
DTC B1019 00 will set automatically as an indicator that the system is in learn mode and not as a fault indicator. Once the travel limits are learned by the liftgate module, the liftgate module will exit calibration mode and DTC B1019 00 become a history code.