LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Programming And Setup - All Systems) >> Repair Instructions >> Trailer Lamp Control Module Programming and Setup >> Trailer Interface Control Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Trailer Interface Control Module Replacement

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

If the trailer interface control module is replaced, the control module programming procedure must be perform

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) 
  2. Perform the SPS function Trailer Interface Control Module - Configuration & Setup and follow the on-screen instructions. On the screen Control Module - Configuration and Setup Function(s), select both control module Configuration/Reconfiguration and control module Setup.
  3. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals