Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Secondary Fuel Tank Module & O-Ring

Courtesy of GENERAL MOTORS CORP.

Install a NEW O-ring (2) and the primary fuel tank module (1).

Fig 2: Identifying Secondary Fuel Pump Module & Crossover Tube

Courtesy of GENERAL MOTORS CORP.

Partially install the secondary fuel pump module and connect the crossover tube (1).

Fig 3: View Of Evaporative Emission Line

Courtesy of GENERAL MOTORS CORP.

Connect the evaporative emission line (1). Refer to Plastic Collar Quick Connect Fitting Service .

Fig 4: Identifying Special Tool CH 48482

Courtesy of GENERAL MOTORS CORP.

Using the CH 48482: wrench, install the cam lock ring (1) by turning clockwise.

Fig 5: Locating Fuel Tank Module Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector (1).
Connect the evaporative emission line (2). Refer to Plastic Collar Quick Connect Fitting Service .
Install the fuel tank. Refer to Fuel Tank Replacement .