Circuit/System Testing
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the S30 headlamp switch.
- Ignition ON, test for greater than 10V between the 12 V reference circuit terminal 1 and ground.
- If less than the specified range, test the 12 V reference circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the K9 BCM.
- Test for 0.4K Ω to 1K Ω between the signal circuit terminal 12 and ground.
- If greater than the specified range, test the signal circuit for a short to voltage or an open/high resistance. If the circuit tests normal, replace the K9 BCM.
- If less than the specified range, test the signal circuit for a short to ground. If the circuit tests normal, replace the K9 BCM.
- If all circuits test normal, test or replace the S30 headlamp switch.