LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Volt >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Positive Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the rear floor stowage compartment. Refer to Rear Compartment Floor Stowage Trim Compartment Replacement .
  2. Disconnect the battery negative cable from the battery. Refer to Battery Negative Cable Disconnection and Connection .
  3. Fig 1: Battery Positive Cable Fuse Block Nut And Terminal
    GM2374800Courtesy of GENERAL MOTORS COMPANY
  4. Remove the battery positive cable fuse block nut (1) and terminal (2) from the battery fuse block.
  5. Remove the quarter inner trim finish panel. Refer to Quarter Inner Trim Finish Panel Replacement .
  6. Separate the battery positive cable from the body harness, while working from the rear compartment towards the passenger compartment.
  7. Fig 2: Battery Positive Cable
    GM2374799Courtesy of GENERAL MOTORS COMPANY
  8. Remove the rear side door floor covering retainer. Refer to Rear Side Door Opening Floor Carpet Retainer Replacement
  9. Detach the battery positive cable (1) from the rear passenger compartment.
  10. Fig 3: Battery Positive Cable And Left Rocker Channel
    GM2374795Courtesy of GENERAL MOTORS COMPANY
  11. Remove the interior trim panels (1). Refer to Center Pillar Trim Panel Replacement , and Front Side Door Opening Floor Carpet Retainer Replacement .
  12. Remove the battery positive cable (2) from the left rocker channel.
  13. Fig 4: Battery Positive Terminal, Engine Wiring Junction Block And Nut
    GM2374796Courtesy of GENERAL MOTORS COMPANY
  14. Detach the battery positive terminal (2), from the engine wiring junction block (3), with the nut (1).
  15. Fig 5: Wiring Harness Grommet
    GM2374797Courtesy of GENERAL MOTORS COMPANY
  16. Pull the battery positive cable (2) through the harness grommet (1).
  17. Remove the battery positive cable from the vehicle.