Steering Angle Sensor Centering
WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
For the centering procedure of the external steering angle sensor (electronic stability program) refer to Steering Angle Sensor Centering . The centering procedure of the internal steering angle sensor (w/o electronic stability program) can be completed with the following steps:
Conditions: Front axle measured and set, engine running, vehicle speed 0 km/h (0 MPH), internal steering angle sensor is activated.
- Using the steering wheel, align the front wheels in the center forward position.
- Using a scan tool, perform the Configuration/Reset Functions, Steering Wheel Angle Sensor Learn procedure.
- Steer from the center position slowly 90° to the left.
- Steer slowly back to the center position and then slowly 90° to the right.
- Steer slowly back to the center position.
- Perform the steering movements again.
- Centering procedure is completed.