LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Configurable Customer Control System) >> Diagnostic Information and Procedures >> Steering Wheel Controls Inoperative >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the harness connector at the right steering wheel control switch.
  2. Connect a DMM between terminals 3 and 4 of the right steering wheel control switch.
    • If any of the resistance measurements for the individual switches are not within the specified resistance values, replace the right steering wheel control switch.
Function Switch Minimum Resistance Value Maximum Resistance Value
Mute/Voice Recognition 1.0k Ohms 1.4k Ohms
Volume Down 1.3k Ohms 1.7k Ohms
Volume Up 1.7k Ohms 2.1k Ohms
Previous 2.2k Ohms 2.6k Ohms
Next 2.8k Ohms 3.2k Ohms
Source 3.6k Ohms 4.0k Ohms
Seek 5.1k Ohms 5.5k Ohms
No Switch Pressed O.L. O.L.