LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Turn Signal Multifunction Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the steering wheel. Refer to Steering Wheel Replacement .
  2. Remove the upper and lower steering column trim cover assembly. Refer to Steering Column Trim Cover Replacement (Manual) , Steering Column Trim Cover Replacement (Telescoping) .
  3. Remove the turn signal and headlamp dimmer switch wire harness straps from the steering column housing assembly and the steering column.
  4. Remove the turn signal and headlamp dimmer switch wire harness assembly from the wire harness strap.
    5. Fig 1: Headlamp Dimmer Switch Assembly
    GM2719648Courtesy of GENERAL MOTORS COMPANY
  5. Remove the 2 pan head tapping screws (1).
  6. Remove the turn signal and headlamp dimmer switch assembly (2).
scientia non olet · About LEMON Manuals