Trailer Brake Control Module Programming and Setup
WARNING: This page is about a different car, the 2012 GMC Sierra, 2012 GMC Cab & Chassis Sierra, 2012 Chevrolet Silverado, and 2012 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
If the Trailer Brake Control Module or the combination Fuel Pump/Trailer Brake Control Module is replaced or needs to be reprogrammed, refer to Service Programming System (SPS) . The calibrations for either of these modules are accessed through the FPCM Fuel Pump Control Module selection in the supported controllers list. The Trailer Brake Control Module is not listed as a separate choice. Once the Fuel Pump Control Module is selected, the SPS system will download the proper calibration for the vehicle based on the VIN entered.