Communication Interface Module Replacement
Courtesy of GENERAL MOTORS COMPANY Communication Interface Module Replacement
| Callout |
Component Name |
|
Preliminary Procedure
- Remove the instrument panel lower compartment. Refer to Instrument Panel Lower Compartment Replacement
.
- Remove the instrument panel insulator. Refer to Instrument Panel Insulator Replacement
.
|
| 1 |
Communication Interface Module Procedure
- Slide the module forward and release from tabs on bracket.
- Disconnect the electrical connections.
- If replacing the communication interface module be sure to transfer wireless communication interface antenna, if equipped.
- For programming and set up procedures, refer to Control Module References
.
|