Removal Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .

Fig 1: Steering Linkage Inner Tie Rod Nut

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Place match marks on the steering linkage inner tie rod nut and the steering linkage inner tie rod before removing. During installation of the nut, align the match marks.

Remove the steering linkage inner tie rod nut (1).
Remove the steering gear boot outer clamp (2).

Fig 2: Steering Gear Boot Components

Courtesy of GENERAL MOTORS COMPANY

Remove the steering gear boot inner clamp (3). Discard the clamp.
Remove the steering gear boot (2).
Clean the steering linkage inner tie rod and the steering gear boot contact area of any lubricant or debris.