Installation Procedure
WARNING: This page is about a different car, the 2014 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
- Install the battery current sensor (2) onto the battery negative cable (1) as shown.
- Install the battery negative cable (2) to the frame rail and tighten the battery negative ground cable fastener (3) to 9 (80 lb in).
- Connect the body harness connector (1) to the battery current sensor (2).
- Install the battery tray. Refer to Battery Tray Replacement .
- Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
- Install the battery. Refer to Battery Replacement .
CAUTION:
Refer to Fastener Caution .