LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Spark LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2014 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery. Refer to Battery Replacement .
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  3. Remove the battery tray. Refer to Battery Tray Replacement .
    4. Fig 1: Body Harness Connector
    GM3611688Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the body harness connector (1) from the battery current sensor (2).
  5. Remove the battery negative ground cable fastener (3) and the battery negative cable (4) from the frame rail.
    6. Fig 2: Battery Current Sensor
    GM2917957Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Note the orientation of the battery current sensor when removing.

  6. Remove the battery current sensor (2) from the battery negative cable (1).
scientia non olet · About LEMON Manuals