LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Starter Heat Shield Bolt And Shield
    GM1861146Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the left catalytic convertor. Refer to Catalytic Converter Replacement - Left Side .
  3. Remove the starter heat shield bolt and shield.
    4. Fig 2: Battery Positive Junction Block Cable Clip And Cable Terminal
    GM1861148Courtesy of GENERAL MOTORS COMPANY
  4. Remove the starter solenoid BAT terminal nut (3).
  5. Remove the battery positive junction block cable terminal (2) from the starter.
    6. Fig 3: Engine Wiring Harness Electrical Connector
    GM1860484Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the engine wiring harness electrical connector (1) from the starter.
    7. Fig 4: Starter Bolts And Starter
    GM1861149Courtesy of GENERAL MOTORS COMPANY
  7. Remove the starter bolts and starter.
scientia non olet · About LEMON Manuals