Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Place the ignition switch in the OFF position.
Without draining the coolant or removing the hoses, remove and position aside the radiator surge tank. Refer to Radiator Surge Tank Replacement (LF1) or Radiator Surge Tank Replacement (LAU) .
Remove the brake pressure modulator valve (BPMV) assembly. Refer to Brake Pressure Modulator Valve Replacement .

Fig 1: View Of BPMV Bracket Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the BPMV bracket bolts (1).

Fig 2: View Of BPMV Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the BPMV bracket (1).
Inspect the bracket insulators for damage and replace, if necessary.