LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Lighting System) >> Diagnostic Information and Procedures >> Interior Backlighting Malfunction >> Circuit/System Testing >> Interior Backlighting Circuit Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Interior Backlighting Circuit Test

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the appropriate backlighting component.
  2. Test for less than 5.0 Ω between the ground circuit terminal and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  3. Connect a test lamp between the control circuit terminal and ground.
  4. Ignition ON, command the LED Backlight Dimming ON and OFF with a scan tool. The test lamp should turn ON and OFF when changing between the commanded states.
    • If the test lamp is always OFF, test the control circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the K9 BCM.
    • If the test lamp is always ON, test the control circuit for a short to voltage. If the circuit tests normal, replace the K9 BCM.
  5. If all circuits test normal, test or replace the component with the inoperative backlighting.
scientia non olet · About LEMON Manuals