LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Trax LS, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System >> Diagnostic Information and Procedures >> Rear Vision Camera System Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition ON.
  2. Verify that DTC B2545 is not set.
    • If the DTC is not set 
  3. Verify there is no debris on the rearview camera lens and that the bezel and bezel seal are not damaged.
    • If debris are found on the lens 

      Clean the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.

    • If no debris on the lens 
  4. Engine running, transmission in REVERSE.
  5. Verify the backup lamps are On.
    • If the backup lamps are ON 
  6. Engine running, transmission in REVERSE.
  7. Verify a clear rear vision image is displayed on the radio.
    • If a clear image is not displayed 

      Refer to Circuit/System Testing below.

    • If a clear image is displayed 
  8. All OK.