Installation Procedure
- Install the throttle fasteners (3) along with a NEW throttle body seal ring (1).
- Install the 4 throttle body fastener (3) and tighten to 8 (71 lb in).
- Install the charge air cooler outlet air hose to the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement .
- Connect the throttle body wiring harness connector.
- Perform the throttle/idle learn. Refer to Q38 Throttle Body: Throttle/Idle Learn .
CAUTION:
Refer to Fastener Caution .