LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Trax LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Object Detection System And Pedestrian Protection System) >> Diagnostic Information and Procedures >> Front View Camera Module Malfunction (Forward Collision Alert - UEU) >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Refer to Diagnostic Aids before performing Circuit/System Verification.

  1. Ignition ON.
  2. Verify the scan tool Forward Collision Alert Function Status parameter is Off, Disabled, Not Ready To Assist or Ready To Assist.
    • If the parameter is Malfunction 

      Refer to Circuit/System Testing - Frontview Camera Module Malfunction

    • If the parameter is not Malfunction 
  3. Verify the driver information center displays and adjusts forward collision alert setting while repeatedly pressing and releasing the forward collision switch. The setting should cycle between far, medium, near, and off.
    • If the display does not change 

      Refer to Circuit/System Testing - Forward Collision Alert Switch Malfunction.

    • If the display changes 
  4. Verify the K109 Frontview Camera Module has good visibility to the road ahead.
    • If visibility is poor 

      Clean windshield.

    • If visibility is good 
  5. All OK.
scientia non olet · About LEMON Manuals