LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Volt >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Antilock Brake System) >> Repair Instructions >> Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: BPMV Mounting Bracket
    GM2375851Courtesy of GENERAL MOTORS COMPANY
  1. Install the BPMV assembly (1) to the bracket (2).
    2. Fig 2: Brake Pressure Modulator Valve (BPMV) And Bolts
    GM2375850Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the 2 BPMV bolts (1) and tighten to 8 N.m (71 lb in).
  3. Install the EBCM. Refer to Electronic Brake Control Module Replacement .
scientia non olet · About LEMON Manuals