LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Camaro LS, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Locating APP Sensor
    GM1407620Courtesy of GENERAL MOTORS COMPANY
  1. Install the APP sensor to the front of dash.
  2. CAUTION:

    Refer to Fastener Caution .

  3. Install the APP sensor mounting nuts and tighten to 9 N.m (80 lb in).
  4. Connect the APP sensor electrical connector.
  5. Operate the accelerator pedal and observe the APP angles using a scan tool. The accelerator pedal should operate freely, without binding between closed throttle and wide open throttle.
  6. Install the closeout/insulator panel.