Circuit/System Verification (Object Detection System And Pedestrian Protection System)
- Verify there is no debris on the rearview camera lens.
- If debris is found on the lens
Clean the debris from the lens.
- If no debris is found on the lens
- If debris is found on the lens
- Engine running, transmission in park.
- Verify the backup lamps are not ON.
- If the backup lamps are ON
Refer to Rearview Camera System Always On.
- If the backup lamps are not ON
- If the backup lamps are ON
- Engine running with the drive wheels chocked, set the park brake and place the transmission in reverse.
- Verify backup lamps are ON.
- If the backup lamps are not ON
Refer to Backup Lamps Malfunction .
- If the backup lamps are ON
- If the backup lamps are not ON
- Verify a clear rear vision image is displayed on the inside rearview mirror.
- If a clear image is not displayed
Refer to Rearview Camera System Does Not Display.
- If a clear image is displayed
- If a clear image is not displayed
- All OK.