Circuit/System Verification
NOTE:
If DTC C056 with failure type byte 4B is the only DTC set, all that should be needed is to perform the distance sensing cruise control module learn procedure.
- Ignition ON.
- Verify DTC C056E 4B is not set.
- If DTC C056E 4B is set
- Perform the distance sensing cruise control module learn procedure. Refer to Distance Sensing Cruise Control Module Learn Procedure .
- Verify the DTC C056E 4B does not set.
- If the DTC C056E 4B sets, replace the K14 Distance Sensing Cruise Control Module.
- If the DTC C056E 4B does not set
- All OK.
- If DTC C056E 4B is not set
- All OK