LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Impala LS >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
    2. Fig 1: Front Compartment Fuse Block Cover
    GM3461427Courtesy of GENERAL MOTORS COMPANY
  2. Remove front compartment fuse block covers (1).
    3. Fig 2: Junction Block Bolts
    GM3461430Courtesy of GENERAL MOTORS COMPANY
  3. Loosen the junction block bolts (1).
  4. Unclip the front compartment fuse block from the front compartment fuse block housing.
    5. Fig 3: Positive Battery Cable
    GM2636297Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect the positive battery cable (1).
    6. Fig 4: Junction Block Base & Nut
    GM2575375Courtesy of GENERAL MOTORS COMPANY
  6. Remove the electrical connectors from the front compartment fuse block housing.
  7. Remove the windshield washer solvent container filler tube. Refer to Windshield Washer Solvent Container Filler Tube Replacement .
  8. Disconnect the wiring harness from the junction block base.
  9. Remove the junction block nut (1) from the block base.
  10. Remove the junction block base (2) from the inner wheelhouse.
scientia non olet · About LEMON Manuals