Cruise Control Vehicle Distance Sensor Module Reprogramming
WARNING: This page is about a different car, the 2014 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Do not reprogram the cruise control vehicle distance sensor module, unless directed by a service procedure, or a service bulletin.
- Connect a scan tool to the vehicle and access SPS.
- Perform the SPS function Distance Sensing Cruise Control Module - Programming and follow the on-screen instructions.
- Perform the SPS function Distance Sensing Cruise Control Module - Configuration and follow the on-screen instructions.
- DTC C056E with failure type byte 4B will set as a result of the programming event.
- Perform the Distance Sensing Cruise Control Module learn procedure. Refer to Distance Sensing Cruise Control Module Learn Procedure
- Clear DTCs after completing the programming procedure.