Human Machine Interface Control Module Replacement
WARNING: This page is about a different car, the 2014 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY Human Machine Interface Control Module Replacement
| Callout |
Component Name |
|
Preliminary Procedure
- Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement
- Remove the instrument panel insulator panel - right side. Refer to Instrument Panel Insulator Replacement - Right Side
.
|
| 1 |
Human Machine Interface Control Module Procedure
- Release the two harness retainers attached to the radio bracket.
- Disconnect the electrical connections.
- Slide module downward to release from bracket.
- Refer to Control Module References
for programming and setup information.
|