Transmission Control Module (TCM) Reprogramming
- If the TCM needs to be reprogrammed, refer to Service Programming System (SPS) .
- Perform the Transmission Adaptive Pressure Reset. Refer to Transmission Adaptive Pressure Reset .
NOTE:
Use a scan tool to view and record the Transmission Control Module - End Model Part Number in the original TCM prior to starting the TCM reprogramming procedure.
- Turn the ignition OFF for 30 seconds.
- Turn the ignition ON with the engine OFF.
- Use the scan tool in order to retrieve history DTCs from all modules.
- Clear all history DTCs.
NOTE:
After programming, perform the following to avoid future misdiagnosis: