LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Spark LS, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.2L - Repair Instructions >> Repair Instructions >> Fuel Tank Replacement (LFM) >> Disassembly Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Disassembly Procedure

    Fig 1: Evaporative Emission Canister Purge Pipe
    GM3415999Courtesy of GENERAL MOTORS COMPANY
  1. Remove the evaporative emission canister purge pipe (1).
  2. Disconnect the fuel tank vent pipe connector (2).
  3. Remove the fuel tank feed pipe (3).
  4. Remove the evaporative emission canister (4). Refer to Evaporative Emission Canister Replacement (LL0) , Evaporative Emission Canister Replacement (LFM) .
  5. Remove the fuel pump (5). Refer to Fuel Tank Fuel Pump Module Replacement (LL0) , Fuel Tank Fuel Pump Module Replacement (LFM) .
  6. Remove the fuel tank heat shield. Refer to Fuel Tank Heat Shield Replacement (LL0) , Fuel Tank Heat Shield Replacement (LFM) .
scientia non olet · About LEMON Manuals