LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement (Left Side) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Wheel Speed Sensor To Knuckle Retaining Bolt
    GM2308702Courtesy of GENERAL MOTORS COMPANY
  1. Install the wheel speed sensor (2) to the knuckle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the wheel speed sensor to knuckle retaining bolt (1) and tighten to 8.5 N.m (75 lb in).
    3. Fig 2: Wheel Speed Sensor Harness And Body Frame Mounted Bracket
    GM2308701Courtesy of GENERAL MOTORS COMPANY
  3. Attach the wheel speed sensor harness to the front strut mounted bracket (2).
  4. Attach the wheel speed sensor harness to the body frame mounted bracket (1).
    5. Fig 3: Wheel Speed Sensor Electrical Connector
    GM2308700Courtesy of GENERAL MOTORS COMPANY
  5. Connect the wheel speed sensor electrical connector (1).
    6. Fig 4: Engine Control Module (ECM) Bracket Bolts
    GM2308699Courtesy of GENERAL MOTORS COMPANY
  6. Position the ECM and ECM bracket to the original place, and install the ECM bracket bolts (1). Refer to Engine Control Module Replacement .
  7. Install the battery. Refer to Battery Replacement .
  8. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  9. Lower the vehicle.
scientia non olet · About LEMON Manuals