LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement (Right Side) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Wheel Speed Sensor And Knuckle Retaining Bolt
    GM2308706Courtesy of GENERAL MOTORS COMPANY
  1. Install the wheel speed sensor (2) to the steering knuckle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the wheel speed sensor to knuckle retaining bolt (1) and tighten to 8.5 (75 lb in).
    3. Fig 2: Body Frame Mounted Bracket
    GM2308705Courtesy of GENERAL MOTORS COMPANY
  3. Attach the wheel speed sensor harness to the front strut mounted bracket (2).
  4. Attach the wheel speed sensor harness to the body frame mounted bracket (1).
    5. Fig 3: Wheel Speed Sensor Electrical Connector
    GM2308704Courtesy of GENERAL MOTORS COMPANY
  5. Connect the wheel speed sensor electrical connector (1).
    6. Fig 4: Radiator Surge Tank Mounting Bolts
    GM2308703Courtesy of GENERAL MOTORS COMPANY
  6. Position the radiator surge tank to the original place, and install the radiator tank mounting blots (1). Refer to Radiator Surge Tank Replacement (LL0) , Radiator Surge Tank Replacement (LFM) .
  7. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  8. Lower the vehicle.
scientia non olet · About LEMON Manuals