Removal Procedure

Remove the fuel tank module. Refer to Fuel Tank Module Replacement .

Fig 1: View Of Fuel Level Sensor Electrical Connector
Courtesy of GENERAL MOTORS COMPANY
Push down on the fuel level sensor electrical connector tab (1), disengaging the retainer and disconnect the electrical connector.
Remove the fuel level sensor wiring from under the module clip (2).

Fig 2: View Of Module Wiring Clip
Courtesy of GENERAL MOTORS COMPANY
Push in the fuel level sensor tabs (1) disengaging the sensor clips from the module bucket.
Slide the fuel level sensor up out from the module bucket.

Fig 3: Identifying Fuel Module Bucket
Courtesy of GENERAL MOTORS COMPANY