Installation Procedure
- Install the windshield into the opening. Refer to Adhesive Installation of Windshields .
- Remove the outside moisture sensor. Refer to Windshield Outside Moisture Sensor Replacement .
- Remove the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement (Without UFL and LDW) , Remote Control Door Lock Receiver Replacement (With UFL and LDW) .
- Install the rearview mirror. Refer to Inside Rearview Mirror Replacement .
- Install the windshield garnish molding. Refer to Windshield Garnish Molding Replacement (Encore) , Windshield Garnish Molding Replacement (Trax) .
- Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement (Trax) , Air Inlet Grille Panel Replacement (Encore) .
- Install the windshield wipers arms. Refer to Windshield Wiper Arm Replacement .
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Close the hood.