Windshield Outside Moisture Sensor Replacement
WARNING: This page is about a different car, the 2013 Chevrolet Trax and 2013 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY Windshield Outside Moisture Sensor Replacement
| Callout |
Component Name |
|
Preliminary Procedure
- Remove the outside moisture sensor cover. Refer to Windshield Outside Moisture Sensor Cover Replacement (Buick) .
- Disconnect the electrical connector at the top side of the windshield outside moisture sensor.
|
| 1 |
Windshield Outside Moisture Sensor Assembly Procedure
- Pinch the tabs on both outer edges of the windshield outside moisture sensor.
- Push the windshield outside moisture sensor upward from the windshield base.
- Remove the windshield outside moisture sensor from the vehicle.
|