Communication Interface Module Bracket Replacement (Chevrolet)

WARNING: This page is about a different car, the 2013 Chevrolet Trax and 2013 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Communication Interface Module Bracket

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement (Buick) . Remove the instrument panel lower trim panel insulator. Refer to Instrument Panel Lower Trim Panel Insulator Replacement . Remove the floor auxiliary mat lower retainer, if equipped. Refer to Floor Auxiliary Mat Lower Retainer Replacement (Buick) . Remove the instrument panel lower airbag passenger side, if equipped. Refer to Instrument Panel Lower Airbag Replacement - Passenger Side (AYF) .
1	Communication Interface Module Bracket Bolts (Qty: 2) CAUTION: Refer to Fastener Caution .
2	Communication Interface Module Bracket Procedure Disconnect the electrical connectors. Transfer components as necessary.

Callout

Component Name

Preliminary Procedures

Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement (Buick) .
Remove the instrument panel lower trim panel insulator. Refer to Instrument Panel Lower Trim Panel Insulator Replacement .
Remove the floor auxiliary mat lower retainer, if equipped. Refer to Floor Auxiliary Mat Lower Retainer Replacement (Buick) .
Remove the instrument panel lower airbag passenger side, if equipped. Refer to Instrument Panel Lower Airbag Replacement - Passenger Side (AYF) .

Communication Interface Module Bracket Bolts (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Communication Interface Module Bracket

Procedure

Disconnect the electrical connectors.
Transfer components as necessary.