Circuit/System Verification
WARNING: This page is about a different car, the 2013 Chevrolet Trax and 2013 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the scan tool Lane Departure Warning Switch Status parameter while pressing and releasing the lane departure warning switch. The parameter should change between open and closed.
- If the parameter does not change
Refer to Circuit/System Testing below.
- If the parameter changes
- If the parameter does not change
- Verify the driver information center displays and adjusts forward collision alert setting while repeatedly pressing and releasing the forward collision switch. The setting should change cycle between far, medium, near, and off.
- If the display does not change
Refer to Circuit/System Testing below.
- If the display changes
- If the display does not change
- All OK.