Fuse Block Replacement

Fig 1: Locating Fuse Block

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the fuse block cover. Remove the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . Remove the battery positive cable from the fuse block only. Refer to Battery Positive Cable Replacement . Remove the positive and negative cable (B+ APM module to battery fuse block) from the fuse block only. Refer to Battery Positive and Negative Cable Replacement (B+ APM Module to Battery Fuse Block) , Battery Positive and Negative Cable Replacement (APM Module Ground Cable) .
1	Body Harness Terminal Nut (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 4.7 N.m (42 lb in)
2	Fuse Block Procedure Loosen the battery positive post clamp nut and remove the fuse block.

Callout

Component Name

Preliminary Procedures

Remove the fuse block cover.
Remove the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
Remove the battery positive cable from the fuse block only. Refer to Battery Positive Cable Replacement .
Remove the positive and negative cable (B+ APM module to battery fuse block) from the fuse block only. Refer to Battery Positive and Negative Cable Replacement (B+ APM Module to Battery Fuse Block) , Battery Positive and Negative Cable Replacement (APM Module Ground Cable) .

Body Harness Terminal Nut (Qty: 3)

CAUTION:

Tighten
4.7 N.m (42 lb in)

Fuse Block
Procedure
Loosen the battery positive post clamp nut and remove the fuse block.