Installation Procedure
- Install the windshield into the opening. Refer to Adhesive Installation of Windshields .
- Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
- Install the windshield wipers arms and blades. Refer to Windshield Wiper Arm Replacement (Driver) , Windshield Wiper Arm Replacement (Passenger) .
- Install the left and right windshield garnish molding. Refer to Windshield Side Garnish Molding Replacement .
- Install the rearview mirror. Refer to Inside Rearview Mirror Replacement .
- Connect the rain sensor connector, if equipped.
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Close the hood.