Installation Procedure

If the tank was replaced, install the fuel tank fuel pump. Refer to Fuel Tank Fuel Pump Module Replacement .
Install the fuel tank (1).

Fig 1: Fuel Tank
Courtesy of GENERAL MOTORS COMPANY
Install the fuel tank straps and tighten the fuel tank strap bolts (1) to 20 N.m (15 lb ft).

Fig 2: Fuel Tank Strap And Bolts
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution .
Return the rear axle (1) to its original position.

Fig 3: Rear Axle
Courtesy of GENERAL MOTORS COMPANY
Support the rear axle with a suitable jack stand.

Fig 4: Rear Axle Bushing Nuts And Bolts
Courtesy of GENERAL MOTORS COMPANY
Install NEW right rear axle bushing nuts (2) and bolts (3).
Install the right lower wheel liner fasteners (1).
Remove the shock fasteners (1) from the shock.

Fig 5: Shock Without The Coil Spring
Courtesy of GENERAL MOTORS COMPANY
Install the rear coil springs. Refer to Rear Spring, Insulator and Jounce Bumper Replacement .
Connect the fuel tank harness electrical connector (3).

Fig 6: Evaporative Emission And Fuel Pipe And Connectors
Courtesy of GENERAL MOTORS COMPANY
Slide the filler hose onto the tank and tighten the hose clamps (2) to 4 N.m (35 lb in).
Connect the evaporative emission and fuel pipe connectors (1). Refer to Plastic Collar Quick Connect Fitting Service .
Refill the fuel tank.