LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Volt >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> Hybrid/EV Control System >> Diagnostic Information and Procedures >> DC Power Conversion Test >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Vehicle OFF.
    NOTE: You must perform the Circuit/System Verification before proceeding with Circuit/System Testing.
  2. Connect a carbon pile tester to the C1 Battery.
  3. Vehicle ON, turn all accessories off. Observe the voltage reading on the tester and the Hybrid Powertrain Control Module Low-Voltage Circuit Voltage parameter in the 14V Power Module data list. The voltage should read between 12.6-15.5V.
  4. Adjust the carbon pile tester so that the Hybrid Powertrain Control Module Low-Voltage Circuit Current parameter in the 14V Power Module data list is reading 160 A.
  5. Verify the voltage reading remains between 12.6-15.5V.
    • If not within the specified range 

      Replace the K1 14V Power Module.

    • If within the specified range 
  6. All OK
scientia non olet · About LEMON Manuals