Circuit/System Verification
- Ignition ON.
- Verify DTC C056D is not set.
- If DTC C056D is set with symptom byte 19, 38, 3B, 3C, 49, or 5A
- Program the K43 Power Steering Control Module.
- Verify the DTC does not set.
- If the DTC sets, replace the K43 Power Steering Control Module.
- If the DTC does not set
- All OK.
- If DTC C056D is set with symptom byte 37 or 39
Replace the K43 Power Steering Control Module
- If DTC C056D is not set
- All OK