LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Cruze Diesel >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the current sensor (2) to the battery negative cable (1).
    Fig 1: Battery Negative Cable & Current Sensor
    GM2027819Courtesy of GENERAL MOTORS COMPANY
  2. Install the current sensor (5) to the battery tray.
    Fig 2: Wiring Harness Current Sensor Plug
    GM2027817Courtesy of GENERAL MOTORS COMPANY
  3. Connect the wiring harness current sensor plug (4).
  4. Install the battery negative cable (2).
    Fig 3: Battery Negative Cable And Battery Ground Cable Nut
    GM2027762Courtesy of GENERAL MOTORS COMPANY
  5. Install the battery ground cable nut (1) and tighten to 9 N.m (80 lb in).
    CAUTION: Refer to Fastener Caution .
  6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  7. Close the hood.
scientia non olet · About LEMON Manuals