LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Cruze Diesel >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the current sensor (2) to the battery negative cable (1).
    Fig 1: Battery Negative Cable & Current Sensor
    GM2027819Courtesy of GENERAL MOTORS COMPANY
  2. Install the battery negative cable (1).
    Fig 2: Wiring Harness Current Sensor Plug
    GM2027817Courtesy of GENERAL MOTORS COMPANY
  3. Install the ground cable (3).
  4. Install the battery ground cable to the battery negative cable nut (2) and tighten to 9 N.m (80 lb in).
    CAUTION: Refer to Fastener Caution .
  5. Install the current sensor (5) at the battery tray.
  6. Connect the wiring harness current sensor plug (4).
  7. Install the battery negative cable (2).
    Fig 3: Battery Negative Cable And Battery Ground Cable Nut
    GM2027762Courtesy of GENERAL MOTORS COMPANY
  8. Install the battery ground cable nut (1) and tighten to 9 N.m (80 lb in).
  9. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals