Installation Procedure

Clip the 2 chassis control module clips (4) to the chassis control module bracket (2).

Fig 1: Fuel Pump Flow Control Module
Courtesy of GENERAL MOTORS COMPANY
Clip the chassis control module (3) to the chassis control module bracket clip (1).
Plug the chassis control module wiring harness plug (2) to the chassis control module (1).

Fig 2: Fuel Pump Flow Control Module
Courtesy of GENERAL MOTORS COMPANY
Install the rear compartment side trim - right side. Refer to Rear Compartment Side Trim Replacement - Right Side .
Program the chassis control module. Refer to Chassis Control Module Programming and Setup