LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Cruze Diesel >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions >> Repair Instructions >> Glow Plug Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Push the module back at the top and slide down in of the glow plug control module bracket.
    Fig 1: Glow Plug Control Module
    GM3459197Courtesy of GENERAL MOTORS COMPANY
  2. Install the glow plug control module nut (1) and tighten to 9 N.m (80 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Connect the 2 wiring harness plugs (4).
  4. If equipped, install the battery cover.
  5. Install the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  6. Programming the glow plug control module. Refer to Glow Plug Control Module Programming and Setup .
scientia non olet · About LEMON Manuals