Body Control Module Bracket Replacement

Fig 1: Body Control Module Bracket

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the body hinge pillar garnish molding - right side. Refer to Body Hinge Pillar Garnish Molding Replacement . Remove the instrument panel insulator - right side. Refer to Instrument Panel Lower Trim Panel Insulator Replacement - Right Side . Disconnect the body control module electrical connectors. Remove the instrument panel harness ground bolt. Release the retainer for the instrument panel harness to body harness inline connector. Seperate and reposition the harness, as necessary. Separate the body harness anchors from the body control module bracket.
1	Body Control Module Bracket Push Pins (Qty: 2) Procedure Release the bracket retaining tabs.
2	Body Control Module Bracket Procedure Transfer components, as necessary.

Callout

Component Name

Preliminary Procedures

Remove the body hinge pillar garnish molding - right side. Refer to Body Hinge Pillar Garnish Molding Replacement .
Remove the instrument panel insulator - right side. Refer to Instrument Panel Lower Trim Panel Insulator Replacement - Right Side .
Disconnect the body control module electrical connectors.
Remove the instrument panel harness ground bolt.
Release the retainer for the instrument panel harness to body harness inline connector. Seperate and reposition the harness, as necessary.
Separate the body harness anchors from the body control module bracket.

Body Control Module Bracket Push Pins (Qty: 2)
Procedure
Release the bracket retaining tabs.

Body Control Module Bracket
Procedure
Transfer components, as necessary.