Circuit/System Verification
- Ignition ON.
- Verify there is no debris on the rearview camera lens and that the bezel and bezel seal are not damaged.
- If debris are found on the lens
Clean the lens. If the lens, bezel or bezel seal are damaged, replace as necessary.
- If no debris on the lens
- If debris are found on the lens
- Engine running, transmission in REVERSE.
- Verify the backup lamps are On.
- If the backup lamps are not ON
Refer to Backup Lamps Malfunction .
- If the backup lamps are ON
- If the backup lamps are not ON
- Engine running, transmission in REVERSE.
- Verify a clear rear vision image is displayed on the radio.
- If a clear image is not displayed
Refer to Circuit/System Testing.
- If a clear image is displayed
- If a clear image is not displayed
- All OK.