Removal Procedure

WARNING: Refer to Brake Dust Warning .

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
Remove the front compartment front splash shield. Refer to Front Compartment Splash Shield Replacement (Front) , Front Compartment Splash Shield Replacement (Middle) and Front Compartment Splash Shield Replacement (Rear) .
Disconnect the wheel speed sensor electrical connector (1) and release the connector from the front compartment side rail.

Fig 1: Wheel Speed Sensor Electrical Connector
Courtesy of GENERAL MOTORS COMPANY
Release the wheel speed sensor harness clips (1) from the left front brake pipe.

Fig 2: Wheel Speed Sensor Harness Clips
Courtesy of GENERAL MOTORS COMPANY
Release the front wheel speed sensor harness grommet (1) from the strut bracket.

Fig 3: Front Wheel Speed Sensor Harness Grommet
Courtesy of GENERAL MOTORS COMPANY
Clean the wheel speed sensor mounting area on the steering knuckle of any accumulated dirt and debris.

Fig 4: Wheel Speed Sensor Bolt
Courtesy of GENERAL MOTORS COMPANY
Remove the wheel speed sensor bolt (1).
Remove the wheel speed sensor from the steering knuckle.